Common Mistakes & Tips to Ensure a Perfect Fit
Before you start installing your new cabinet doors, let’s go over some of the most common mistakes DIYers make and how you can avoid them. Following these tips will help make the process smoother and ensure a perfect fit.
Common Mistakes:
Incorrect Measuring
One of the most common mistakes is measuring the wrong side of the cabinet frame. It’s crucial to measure the inside of the frame where the door will fit, not the outside. If you measure the wrong side, your door may not fit properly.
Tip: Always measure from the inside edge of the cabinet frame to get the correct dimensions for your door.
Misalignment of Hinges
If the hinges are installed too high, too low, or at the wrong angle, your door may not align correctly with the cabinet frame. This can result in a door that doesn’t close properly or uneven gaps around the door.
Tip: Double-check your hinge placement using a level and square tool to ensure your hinges are positioned perfectly before securing them.
Skipping the Pre-Installation Check
Not checking if your cabinet frame is square and level before installing the door can lead to misaligned doors that won’t fit properly. If the frame is out of square, it will affect how the door fits.
Tip: Always use a level to check your cabinet frame before you start. If your frame is not square, adjust it with shims to get it aligned correctly.
Tips to Avoid Mistakes:
Double-Check Measurements:
Measure twice, cut once! It’s always a good idea to double-check your measurements before cutting or ordering your replacement doors. A small error now can lead to a big headache later.
Use a Level During Installation:
Make sure the door is straight and aligned properly by using a level during installation. This will ensure the door hangs correctly and closes smoothly.
Test the Door Fit:
Before securing the door permanently, test the fit by holding the door in place. Make sure it opens and closes smoothly, with no gaps or misalignment. It’s easier to adjust now than after it’s fully mounted.
Need Extra Help?
If you’re unsure at any point, feel free to refer to our installation video or reach out to our support team for assistance. We’re here to help you every step of the way!