Summit Drawer Front
Fast Lead Times
10-12 Business Days
Made in the USA
Locally made and shipped nationwide
Customer Service
In-house expert team ready to help
Standard Lead Times
Production:10-15 Business Days
Shipping Time: Please allow 3-7 days for shipping
Door Size Standards
Minimum size: 7″ W × 7″ H
Maximum warranty size: 24″ W × 48″ H (standard or open frame doors)
Oversized Door Conditions:
- Doors over 24" wide must include a vertical mullion to qualify for warranty coverage.
- Doors over 48" high must include a horizontal mullion to qualify for warranty coverage.
- Doors built beyond these dimensions without mullions are not covered against bow, warp, or structural issues.
Additional Notes:
- Minimum door size is based on standard 2 ¼" stiles and rails. Increasing stile or rail width will increase the minimum size.
- Oversized doors may be built at the customer’s request but are not warrantied against warp or bow.
- Open frame doors may be more prone to warping and are covered only within the listed sizes.
- Warp and bow are measured per door, not across a pair.
Drawer Front Sizes & Thickness
Minimum size: 7″ W × 5 ½” H
Standard thickness:Â 3/4″
Warranty Coverage:
- Drawer fronts follow the same warp/bow tolerances as doors.
- Oversized or custom drawer fronts are built at the customer’s risk and are not covered under warranty.
Additional Notes:
- Standard minimums are based on a 2 ¼" stile and a reduced 1 ½" rail.
- Warp is measured per individual drawer front.
Door Thickness
Standard thickness: ¾” (±1/64″)
Optional thickness:Â 1″ available for cope-and-stick and applied molding doors.
Mitered door thickness depends on the profile and cannot be changed.
Panel & Rail Standards
Minimum stile width: 1 ¼”
Minimum rail height: 1 ¼”
Minimum borable stile widths:
Standard doors: 1 â…ž”
Open frame doors: 2 ¼”
Construction Details:
- Large doors may require additional center rails for strength.
- Small doors under 8 ½" width may use modified proportions or slab construction.
- Center panels are sized for natural expansion and contraction.
- Flat panels may be MDF or veneered MDF; raised panels are solid wood unless otherwise noted.
Boring & Hinge Standards
Standard boring:Â 35mm hole with 8mm dowel or pilot holes (Blum standard).
Placement:Â 4″ from top and bottom edges unless specified.
Additional hinges:
Doors over 48″ tall: 3 hinges minimum.
Doors up to 72″ tall: 4 hinges minimum.
Open frame doors must meet the required stile widths to qualify for boring.
Blum hinge model number: 30C255B.08
Finish Preparation
All products are shipped raw, sanded, and ready for finish.
- Sanded through 180 grit by hand and machine.
- If stored in unconditioned or humid environments, additional prep sanding may be needed.
- Wipe clean before finishing.
- Finish within 30 days of delivery to maintain warranty coverage.
Warranty Coverage:
- Cabinet Doors Plus does not warranty finish results.
- Finish variations from natural wood characteristics (color, grain, knots, etc.) are not considered defects.
- Products finished without proper prep or stored improperly void the finish warranty.
Wood And Material Standards
- Wood is a natural material: grain, texture, and color variations are normal.
- Color differences within or between doors are expected and not defects.
- MDF panels are recommended for painted applications.
- Exposure to sunlight will naturally change the wood tone over time.
- End grain absorbs finish differently and may appear darker; this is not a defect.
Warranty Coverage:
- Covers defects in workmanship and construction only.
- No warranty on color match between doors, fronts, or moldings.
Moisture Content
- All wood is manufactured at a moisture content of 6–8%.
- Intended for installation in 35–50% relative humidity environments.
- Cabinets should not be installed until the HVAC system is operational and normal living conditions are established.
Warranty Coverage:
- Warranty void if products are stored or installed outside of the humidity range.
- Seasonal expansion or contraction is normal and not covered.
Saw Cut Options
- Doors can be ordered in three different saw cuts. Plain slice flat cut is our most affordable option and the default selection on the site.
- Quarter sawn and rift sawn are available as custom upgrades for customers who want a more specific grain appearance or a higher end look.
- To request quarter sawn or rift sawn white oak, please call our team or fill out the contact form and we will set up a custom order.
How To Videos
Shipping Standards
LTL Shipping: RL Carriers
If any items in your order are above 60″ in width or height your shipment will come via LTL shipping.
If you are not familiar with this type of shipping, there are a few differences from a UPS or FedEx shipping company.
The LTL company will call you the day before to schedule your delivery. You MUST schedule your appointment or your item will not be shipped. The LTL driver will provide what is called curbside delivery.
They will not bring the item into your house. Please be prepared to receive the shipment, note any shipping related damage on the bill of lading, and bring the item to a safe location.
Ground Shipping: UPS
In both cases; please allow up to 7 business days for shipping.
Â
Warranty Exclusions
Warranty does not cover:
- Damage from improper storage, handling, finishing, or installation.
- Exposure to humidity outside 35–50%, extreme heat, or moisture.
- Warp/bow beyond stated tolerances or in oversized parts without mullions.
- Finish issues, natural wood characteristics, or color variations.
- Painted veneer materials.
Warranty Claim Process
To file a claim:
Submit within 90 days of delivery.
Include:
Cabinet Doors Plus order number
Clear photos of the issue
Description and measurements (if applicable)
Cabinet Doors Plus reserves the right to inspect or request product return before approving a claim. If approved, products will be repaired or replaced at our discretion.
Note:Â Removal, installation, or shipping costs are not covered.
Our Commitment
At Cabinet Doors Plus, we stand behind our craftsmanship. Every door and drawer front is made to meet the highest standards of quality and performance. While natural variations are part of real wood’s beauty, we’re committed to fairness, transparency, and service that earns your trust.